Ledlenser T7 flashlight red
The Ledlenser T7 tactical flashlight is a very popular model of tactical flashlights. Its reflector is equipped with a red filter, therefore it produces a red light cone, which is used mainly by shooters, hunters, fishermen and in cases where high-quality signaling is needed. The flashlight, measuring 130 mm and 175 g, reaches an output of up to 120 lm with a range of up to 140 m. The flashlight can last up to 8 hours in the more economical mode, and one hour in the strongest mode.
The flashlight is powered by four AAA micro-cell batteries. Speed Focus allows you to focus the cone with a single movement of your thumb. The flashlight head is equipped with a groove and a raised tactile ring for better focus control in adverse weather or with gloves. This is also accompanied by a switch with improved grip, making it easier to work with gloves. The flashlight is highly resistant to splashing water and falls from a height as standard. Electrolytic gold-plated contacts give the flashlight extreme corrosion resistance. It is covered by a seven-year warranty.
The combination of a lens and a reflector has created a unique technology that has no equal in the world.
This created a reflector lens that allows the light beam to be focused with a smooth transition from a wide homogeneous circle of light to a sharp beam and vice versa. Focusing is done by simply moving the lamp head forward (focus) or backward (defocus). LEDLENSER lamps are the only ones in the world that use the principle of light refraction. Conventional lamps only reflect light from reflective surfaces inside the lamp head.
AFS International Patents:
Patent-No. China: ZL 200680000752.1Patent-No. Europe: EP 1880 139 B1Patent-No. US: 7,461,960Patent-No. HongKong: 1108730
Speed Focus
Fast focusing. SPEED FOCUS is a fast and reliable sliding focusing mechanism and in many ways better than conventional rotary mechanisms. It is an integral part of the AFS (Advanced Focus System). In order for this mechanism to work, it is necessary to place the LED, lens and reflector on one axis. The precise positioning of this system is carried out using laser technology. You can then control the flashlight simply with one hand, when you move the flashlight head away from you or towards you with your thumb and thus achieve blurring or focusing of the light at lightning speed and, most importantly, comfortably.
Gold-plated contacts
Gold is a very special material. Wars have been fought over gold, people have been robbed and murdered. Today, you will increasingly learn that gold is an excellent electrical conductor and is extremely durable. Its durability lies in its ability to resist corrosion and its high degree of chemical resistance. It is estimated that approximately 70% of flashlight failures can be attributed to corrosion damage caused by battery acid or gas. That is why LEDLENSER flashlights have gold-plated contacts. Thanks to this expensive measure, LEDLENSER flashlights last for decades.
Flashlight materials also differ in their electrical conductivity. Under high load, some conductors heat up, which increases the resistance in such a material, reduces the voltage and converts the flowing energy into heat, which is desirable for an electric heater, but in flashlights it is exactly the opposite. The energy supplied from the batteries must not heat the contacts, but be supplied to the LED diode. Many competing manufacturers use cheap contacts, which will have a significant impact on the flashlight's performance and its operating time. Thanks to the gold-plated contacts, the electronics of LEDLENSER flashlights will last intact for decades.
IPX4-8 resistance
LEDLENSER will not let you down in snow or rain.
IMPACT RESISTANCE
The lamps are resistant to falling from a height.
All lamps meet.

Modular system
The modular system makes it easy to replace the defective part in the event of a lamp failure. This system also makes it easier to clean the lamp during extreme use. In the event that, for example, the batteries leak, you just need to replace theYou can continue to use the battery box and the flashlight indefinitely.
1. Dynamic switch 2. Battery box 3. Flashlight body 4. Speed Focus 5. Reflector lens 6. Flashlight head 7. LED chip with cooling 8. Gold-plated contacts 9. Waterproof flashlight cap















