- On request
Ledlenser P6 flashlight
The slim and elegant Ledlenser P6.2 flashlight impresses with its unusual combination of size and performance. In a body that is only 163 mm long and weighs 116 g, there is a light output of 200 lm with a range of up to 120 m and a battery life of up to 25 hours. It is therefore no wonder that this flashlight is sought after by professional firefighters who attach it to their helmets. But it is also popular in households or during outdoor activities.
The flashlight is powered by two AA batteries. The Advanced Focus System function ensures that the reflector lens focuses the light beam with a smooth transition from a wide homogeneous circle to a sharp beam and vice versa. Focusing is done by simply moving the flashlight head. The package includes a hand strap and a practical case. The metal body is highly resistant to splashing water and falls from a height as standard. Electrolytic gold-plated contacts give the flashlight extreme corrosion resistance. The flashlight is covered by a seven-year warranty.
Package includes: flashlight, 2x AA batteries, hand strap, case, 100% original sticker, instructions
Advanced Focus System The combination of the lens and the reflector created a unique technology that has no analogues in the world. This created a reflector lens that allows the light beam to be focused with a smooth transition from a wide homogeneous circle of light to a sharp beam and vice versa. Focusing is done by simply moving the lamp head forward (focus) or backward (defocus). LEDLENSER lamps are the only ones in the world to use the principle of light refraction. Conventional lamps only reflect light from reflective surfaces inside the lamp head. AFS international patents: Patent-No. China: ZL 200680000752.1Patent-No. Europe: EP 1880 139 B1Patent-No. USA: 7,461,960Patent-No. HongKong: 1108730 Speed Focus Fast focusing. SPEED FOCUS is a fast and reliable sliding focusing mechanism and in many ways better than conventional rotary mechanisms. It is an integral part of the AFS (Advanced Focus System). In order for this mechanism to work, it is necessary to place the LED, lens and reflector on one axis. The precise positioning of this system is carried out using laser technology. You can then control the flashlight simply with one hand, by moving the flashlight head away from you or towards you with your thumb, thus achieving blurring or focusing of the light at lightning speed and, most importantly, comfortably. Gold-plated contacts Gold is a very special material. Wars have been fought over gold, people are robbed and murdered. Today, you will increasingly learn that gold is an excellent electrical conductor and is extremely durable. Its durability lies in its ability to resist corrosion and in its high degree of chemical resistance. It is estimated that approximately 70% of flashlight failures can be attributed to corrosive damage caused by acid or gas from batteries. That is why LEDLENSER flashlights have gold-plated contacts. Thanks to this expensive measure, LEDLENSER flashlights last for decades. Flashlight materials also differ in their electrical conductivity. Under high load, some wires heat up and as a result the resistance in such material increases, the voltage decreases and the flowing energy is converted into heat, which is desirable for an electric heater, but for flashlights it is exactly the opposite. The energy supplied from the batteries must not heat the contacts, but be supplied to the LED diode. Many competing manufacturers use cheap contacts, which will have a significant impact on the performance of the flashlight and its use time. Thanks to the gold-plated contacts, the electronics of LEDLENSER flashlights will last intact for decades. The IPX4-8 resistance of LEDLENSER will not let you down in snow and rain. IMPACT RESISTANCEThe flashlights are resistant to falling from a height. They meet all flashlights. Modular system The modular system allows you to replace the defective part quite easily in the event of a flashlight failure. This system also makes it easier to clean the flashlight during extreme use. In the event that, for example, the batteries leak, you only need to replace the battery box and you can continue to use the flashlight indefinitely. 1. Dynamic switch 2. Battery box 3. Flashlight body 4. Speed Focus 5. Reflector lens 6. Flashlight head 7. LED chip with cooling 8. Gold-plated contacts 9. Waterproof flashlight cap
D0704025
Parameters
- Weight
- 116 g
- Length
- 163 mm
- Light intensity
- 500 - 1000 lm
- Maximum beam range
- up to 100 m
- Battery
- 2xAA 1.5 V
- Lighting time
- 25 h
- ICE
- High End Power LED
The slim and elegant Ledlenser P6.2 flashlight impresses with its unusual combination of size and performance. In a body that is only 163 mm long and weighs 116 g, there is a light output of 200 lm with a range of up to 120 m and a battery life of up to 25 hours. It is therefore no wonder that this flashlight is sought after by professional firefighters who attach it to their helmets. But it is also popular in households or during outdoor activities.
The flashlight is powered by two AA batteries. The Advanced Focus System function ensures that the reflector lens focuses the light beam with a smooth transition from a wide homogeneous circle to a sharp beam and vice versa. Focusing is done by simply moving the flashlight head. The package includes a hand strap and a practical case. The metal body is highly resistant to splashing water and falls from a height as standard. Electrolytic gold-plated contacts give the flashlight extreme corrosion resistance. The flashlight is covered by a seven-year warranty.
Package includes: flashlight, 2x AA batteries, hand strap, case, 100% original sticker, instructions
