- On request
Ledlenser MT10 flashlight
The new outdoor series of Ledlenser MT hand-held flashlights is intended primarily for hunting, fishing and camping. But it can be used in practically all outdoor sectors. The domain of the individual models is the combination of high performance, long endurance and extreme durability. Specifically, the Ledlenser MT10 flashlight with a rechargeable battery provides illumination at a maximum output of 1000 lm at a distance of up to 180 m for six hours.
In total, the user has a choice of three light modes. In the economy mode (10 lm, 20 m), the flashlight can last up to 144 hours! The flashlight, measuring 128 mm and 156 g, is above average resistant according to IPX4 standards, so it will not disappoint in rain or snow or even when falling from a height. The flashlight can be programmed using the Smart Light Technology function, and of course it includes the Advanced Focus System reflector lens and a quick focus mechanism. The Temperature Control system protects the flashlight from overheating.
Electrolytically gold-plated contacts guarantee high resistance to corrosive damage, most often caused by acid or gas from batteries. This is confirmed by the seven-year warranty that applies to Ledlenser flashlights. The flashlight is also compatible with a GoPro adapter, so you can attach it to a helmet or tripod instead of a camera, for example. The flashlight can be equipped with a set of color filters.
Advanced Focus System
The combination of a lens and a reflector has created a unique technology that has no equal in the world.
This created a reflector lens that allows the light beam to be focused with a smooth transition from a wide homogeneous circle of light to a sharp beam and vice versa. Focusing is done by simply moving the lamp head forward (focus) or backward (defocus). LEDLENSER lamps are the only ones in the world that use the principle of light refraction. Conventional lamps only reflect light from reflective surfaces inside the lamp head.
AFS International Patents:
Patent-No. China: ZL 200680000752.1Patent-No. Europe: EP 1880 139 B1Patent-No. US: 7,461,960Patent-No. HongKong: 1108730
Smart Light Technology
Different areas of application require individual lamp settings and individual functions. For this reason, the new technology " SMART LIGHT TECHNOLOGY" was created. Abbreviation SLT.
Speed Focus
Fast focusing. SPEED FOCUS is a fast and reliable sliding focusing mechanism and in many ways better than conventional rotary mechanisms. It is an integral part of the AFS (Advanced Focus System). In order for this mechanism to work, it is necessary to place the LED, lens and reflector on one axis. The precise positioning of this system is carried out using laser technology. You can then control the flashlight simply with one hand, when you move the flashlight head away from you or towards you with your thumb and thus achieve blurring or focusing of the light at lightning speed and, most importantly, comfortably.
Rechargeable flashlight
This icon indicates a rechargeable flashlight.
Charging via USB
You can charge the flashlight anywhere,
in the car, from a laptop or docking station
station.
IPX4-8 resistance
LEDLENSER will not let you down in snow or rain.
IMPACT RESISTANCE
The lamps are resistant to falling from a height.
All lamps meet.
Gold-plated contacts
Gold is a very special material. Wars have been fought over gold, people have been robbed and murdered. Today, you will increasingly learn that gold is an excellent electrical conductor and is extremely durable. Its durability lies in its ability to resist corrosion and its high degree of chemical resistance. It is estimated that approximately 70% of flashlight failures can be attributed to corrosion damage caused by battery acid or gas. That is why LEDLENSER flashlights have gold-plated contacts. Thanks to this expensive measure, LEDLENSER flashlights last for decades.
Lamp materials also differ in their electrical conductivity. Under high load, some conductors heat up, which increases the resistance in such a material, reduces the voltage, and converts the flowing energy into heat, which is desirable in an electric heater, but in lamps it is exactly the opposite. The energy supplied by batteries cannot be heat the contacts, but be supplied to the LED diode. Many competing manufacturers use cheap contacts, which significantly affects the performance of the flashlight and its use time. Thanks to the gold-plated contacts, the electronics of LEDLENSER flashlights will last intact for decades.
Modular system
The modular system makes it easy to replace a defective part in the event of a lamp failure. This system also makes it easier to clean the lamp during extreme use. In the event that the batteries leak, for example, you only need to replace the battery box and you can continue to use the lamp indefinitely.
1. Dynamic switch 2. Battery box 3. Flashlight body 4. Speed Focus 5. Reflector lens 6. Flashlight head 7. LED chip with cooling 8. Gold-plated contacts 9. Waterproof flashlight cap
182
Parameters
- Weight
- 156 g
- Length
- 133 mm
- Battery
- 1 x Li-ion
- Lighting time
- 6/15/144 h
- ICE
- Xtreme LED
- Luminous flux
- 1000/200/10 lm
- Light range
- 180/100/20 m
The new outdoor series of Ledlenser MT hand-held flashlights is intended primarily for hunting, fishing and camping. But it can be used in practically all outdoor sectors. The domain of the individual models is the combination of high performance, long endurance and extreme durability. Specifically, the Ledlenser MT10 flashlight with a rechargeable battery provides illumination at a maximum output of 1000 lm at a distance of up to 180 m for six hours.
In total, the user has a choice of three light modes. In the economy mode (10 lm, 20 m), the flashlight can last up to 144 hours! The flashlight, measuring 128 mm and 156 g, is above average resistant according to IPX4 standards, so it will not disappoint in rain or snow or even when falling from a height. The flashlight can be programmed using the Smart Light Technology function, and of course it includes the Advanced Focus System reflector lens and a quick focus mechanism. The Temperature Control system protects the flashlight from overheating.
Electrolytically gold-plated contacts guarantee high resistance to corrosive damage, most often caused by acid or gas from batteries. This is confirmed by the seven-year warranty that applies to Ledlenser flashlights. The flashlight is also compatible with a GoPro adapter, so you can attach it to a helmet or tripod instead of a camera, for example. The flashlight can be equipped with a set of color filters.
