• On request

Ledlenser H3.2 headlamp (damaged packaging)

The new Ledlenser H3.2 headlamp is an improved successor to the popular "H3". This lamp also stands out for its lightness - together with three AAA batteries it weighs only 133 g. However, its performance has been significantly improved: thanks to the reflector lens, which is part of the unique Advanced Focus System, it shines with an output of 120 lm at a distance of 100 m for up to 6 hours. In economy mode (5 lm, 20 m), it can last for 60 hours.

The tilting head of the headlamp can rotate the light cone by up to 90°. Electrolytically gold-plated contacts guarantee high resistance to corrosive damage, most often caused by acid or gas from batteries. This is confirmed by the seven-year warranty that applies to Ledlenser lamps. The Ledlenser H3.2 headlamp is splash-proof and shock-proof according to the IPX4 standard, which will be especially appreciated by fishermen, athletes and all fans of outdoor activities. However, it will also be very useful for installers and DIY enthusiasts.

€30.58
Count
Add to wishlist
On request

Advanced Focus System

The combination of a lens and a reflector has created a unique technology that has no equal in the world.

This created a reflector lens that allows the light beam to be focused with a smooth transition from a wide homogeneous circle of light to a sharp beam and vice versa. Focusing is done by simply moving the lamp head forward (focus) or backward (defocus). LEDLENSER lamps are the only ones in the world that use the principle of light refraction. Conventional lamps only reflect light from reflective surfaces inside the lamp head.

AFS International Patents:

Patent-No. China: ZL 200680000752.1Patent-No. Europe: EP 1880 139 B1Patent-No. US: 7,461,960Patent-No. HongKong: 1108730

Speed Focus

Fast focusing. SPEED FOCUS is a fast and reliable sliding focusing mechanism and in many ways better than conventional rotary mechanisms. It is an integral part of the AFS (Advanced Focus System). In order for this mechanism to work, it is necessary to place the LED, lens and reflector on one axis. The precise positioning of this system is carried out using laser technology. You can then control the flashlight simply with one hand, when you move the flashlight head away from you or towards you with your thumb and thus achieve blurring or focusing of the light at lightning speed and, most importantly, comfortably.

Gold-plated contacts

Gold is a very special material. Wars have been fought over gold, people have been robbed and murdered. Today, you will increasingly learn that gold is an excellent electrical conductor and is extremely durable. Its durability lies in its ability to resist corrosion and its high degree of chemical resistance. It is estimated that approximately 70% of flashlight failures can be attributed to corrosion damage caused by battery acid or gas. That is why LEDLENSER flashlights have gold-plated contacts. Thanks to this expensive measure, LEDLENSER flashlights last for decades.

Flashlight materials also differ in their electrical conductivity. Under high load, some conductors heat up, which increases the resistance in such a material, reduces the voltage and converts the flowing energy into heat, which is desirable for an electric heater, but in flashlights it is exactly the opposite. The energy supplied from the batteries must not heat the contacts, but be supplied to the LED diode. Many competing manufacturers use cheap contacts, which will have a significant impact on the flashlight's performance and its operating time. Thanks to the gold-plated contacts, the electronics of LEDLENSER flashlights will last intact for decades.

IPX4-8 resistance

LEDLENSER will not let you down in snow or rain.
IMPACT RESISTANCE
The lamps are resistant to falling from a height.
All lamps meet.


232

Parameters

Weight
133 g
Battery
3 x AAA
Durability certificate
IPX4
Lighting time
6/60 h
ICE
Power LED
Luminous flux
120/5 lm
Light range
100/20 m